Inspect Insert to Ensure Fully Seated

Description of Application:

Inspection of the part to ensure the insert has been fully seated.

Inspection Setup:

Vision system: Cognex Insight 7200-11
Illumination: ODS75-625-N
Lens: Schott Moritex ML-10035
Filter: BP635-30.5
Extras: None 
(A) Lens Working Dist: ~ 40.0″
(B) Light Working Dist: ~ 31.0″
(C) Horizontal FOV: ~ 2.50″


In this Insight Application pattern tools and measurement tools are used to ensure the part is fully seated. An overdrive brick light is used to illuminate the part. This light is needed due to the material we are illuminating. The part must be fixtured for the application to be robust. The current setup configuration must be utilized. If this configuration cannot be accommodated the application will not be robust. The color of the part must remain consistent. If the color varies the application may not be robust. Evaluation conducted by McNaughton-McKay Electric Company.

Application Images