EZ Mount LED Ring Lights

Ring Lights - EZ Mount

All EZ Mount LED Ring Light Mount Directly to a Camera Lens

The EZ Mount LED Ring Light can be quickly and easily adapted to any vision system with either of four standard mounting options. First, there is a standard M46 thread protruding from the back of the EZ Mount LED Ring Light. Using readily available step-up or step-down rings it can be mounted directly to the threads found on the front end of most lenses. Second is the ability to mount the lens at the front end of the EZ Mount LED Ring Light. Once again, an off-the-shelf step up or step down adapter ring can be used to adapt lenses with M43 or smaller filter mounting threads. A flange at the front end of the EZ Mount LED Ring Light holds the step ring with three set screws, and the camera lens is inserted through the center of the EZ Mount LED Ring Light and threaded onto the step ring. In those few cases where the lens's locking thumbscrews may prevent the lens from fitting through the center of the EZ Mount LED Ring Light, extra low-profile replacement set screws are included, allowing the protruding thumbscrews to be removed. Step up and Step down adapter rings are not included with the light. Third is a T-slot on all sides. Standard industrial T-nuts can be dropped into the slot for mounting. Fourth way to mount the light is using the threaded M4 holes on the back plate of light. The EZ Mount LED Ring Light are a high output LED light in an aluminum housing. Housing uses industry standard T-Slots for ease of mounting. Ring Lights are available in light output of White, Red, Amber, Blue, Green, Cyan, IR and UV. Ring Light includes an integrated constant current driver with a built in strobe input with option for PNP or NPN trigger control. No need for an external driver to control the light. The integrated driver also includes variable light intensity control. Light can be controlled by a manual potentiometer or a 0-10VDC analog signal.

R80 & ODR80

RD80 - Diffuse LED Ring Light

The all metal construction of the Ring Light Series of lights provides a small particle resistant and all around durable light. Its simple plug and play 5 Pin M12 connector allows for ease of use while allowing for full control. The 0-10 VDC intensity control assists in gaining full control of the light output. A standard 42 mm inner hole diameter allows for use with nearly all camera systems with available step-up and step-down conversion kits adapters.

The R80 operates with either an NPN or a PNP signal and runs on an industry standard 24 VDC.

The ODR80 features an Overdrive driver with NPN or PNP signal options.

R80 Product Details

  • T-Slot for mounting
  • Conversion adapters for different cameras
  • PNP and NPN strobe input
  • Continuous operation or strobe mode
  • Dimmable via built in potentiometer
  • Analog intensity 0-10VDC signal
  • Four, 1mm² die high current LEDs

ODR80 Product Details

  • 4-5 times brighter than standard high current LEDs
  • SafeStrobe Technology
  • T-Slot for mounting
  • Conversion adapters For different cameras
  • PNP and NPN strobe input
  • OverDrive/Strobe only
  • Up to 5000 strobes per second
  • Maximum strobe time 125mS
  • Lens options for the R80 & ORD80

    Wide angle comes standard. Narrow angle lenses are available.

    Wavelength options for the R80 & ODR80

    Wavelength options for R80 and ODR80

    R130 & ODR130

    R130 - LED Ring Light

    The all metal construction of the Ring Light Series of lights provides a small particle resistant and all around durable light. Its simple plug and play 5 Pin M12 connector allows for ease of use while allowing for full control. The 0-10 VDC intensity control assists in gaining full control of the light output. A standard 42 mm inner hole diameter allows for use with nearly all camera systems with available step-up and step-down conversion kits adapters.

    The R130 operates with either an NPN or a PNP signal and runs on an industry standard 24 VDC.

    The ODR130 Series of ring light features an Overdrive driver with NPN or PNP signal options.

    R130 Product Details

    • Conversion adapters for different cameras
    • PNP and NPN Strobe Input
    • Continuous operation or strobe mode
    • Dimmable via built in potentiometer
    • Standard with wide lenses
    • Analog intensity 0-10VDC signal
    • Eight, 1mm² Die High Current LEDs

    ODR130 Product Details

    • 4-5 times brighter than standard high current LEDs
    • SafeStrobe Technology
    • T-Slot for mounting
    • Conversion adapters for different cameras
    • PNP and NPN strobe input
    • Standard with wide lenses
    • Up To 5000 strobes per second
    • Maximum strobe time 125mS
    • Eight, 1mm² die high current LEDs

    Lens options for the R130 & ORD130

    Wide angle comes standard. Narrow angle lenses are available.

    Wavelength options for the R130 & ODR130

    Wavelength options for R130 and ODR130

    ODR130-16

    ODR130 - OverDrive Ring Light with 16 LEDs

    The ODR130-16 Series ring light features an Overdrive driver with NPN or PNP signal options. The all metal construction of the Ring Light Series of lights provides a small particle resistant and all around durable light. Its simple plug and play 5 Pin M12 connector allows for ease of use while allowing for full control. The 0-10 VDC intensity control assists in gaining full control of the light output. A standard 42 mm inner hole diameter allows for use with nearly all camera systems with available step-up and step-down conversion kits adapters.

    The ODR130-16 Series of ring light features an Overdrive driver with NPN or PNP signal options.

    ODR130-16 Product Details

    • 4-5 times brighter than standard high current LEDs
    • SafeStrobe Technology
    • T-Slot for mounting
    • Conversion adapters for different cameras
    • PNP and NPN strobe input
    • OverDrive/Strobe Only
    • Up To 5000 strobes per second
    • Maximum strobe time 125mS
    • Sixteen, 1mm² die high current LEDs

    Lens options for the ODR130-16

    Wide angle comes standard. Narrow angle lenses are available.

    Wavelength options for the ODR130-16

    Wavelength options for R130 and ODR130

    RD80 & ODRD80 (Diffuse Ring Light)

    RD80 - Diffuse LED Ring LightThe all metal construction of the Ring Light Series of lights provides a small particle resistant and all around durable light. Its simple plug and play 5 Pin M12 connector provides ease of use while allowing for full control. The 0-10 VDC intensity control assists in gaining full control of the light output. The provided diffuse lens breaks up light into a more diffuse and even pattern - great for inspecting metallic or semi-metallic materials. A standard 42 mm inner hole diameter allows for use with nearly all camera systems with available step-up and step-down conversion kits adapters.

    The RD80 operates with either an NPN or a PNP signal and runs on an industry standard 24 VDC.

    The ODRD80 features an Overdrive driver with NPN or PNP signal options.

    RD80 Product Details

    • Backlight diffuser
    • T-Slot for mounting
    • Conversion adapters for different cameras
    • PNP and NPN strobe input
    • Diffuse acrylic backlight Lens
    • Continuous operation or strobe mode
    • Dimmable via built In potentiometer
    • Analog intensity 0-10VDC signal
    • Four, 1mm² die high current LEDs

    ODRD80 Product Details

    • 4-5 times brighter than standard high current LEDs
    • SafeStrobe Technology
    • Backlight diffuser
    • T-Slot for mounting
    • Conversion adapters for different cameras
    • PNP and NPN strobe input
    • Continuous operation or strobe mode
    • Dimmable via built In potentiometer
    • Analog intensity 0-10VDC signal
    • Eight, 1mm² die high current LEDs

    Lens options for the RD80 & ODRD80

    Wide angle comes standard. Narrow angle lenses are available.

    Wavelength options for the RD80 & ODRD80

    Wavelength options for RD80 and RD130

    RD80 & RD130 (Diffuse Ring Light)

    RD130 - Diffuse LED Ring LightThe all metal construction of the Ring Light Series of lights provides a small particle resistant and all around durable light. Its simple plug and play 5 Pin M12 connector provides ease of use while allowing for full control. The 0-10 VDC intensity control assists in gaining full control of the light output. The provided diffuse lens breaks up light into a more diffuse and even pattern - great for inspecting metallic or semi-metallic materials. A standard 42 mm inner hole diameter allows for use with nearly all camera systems with available step-up and step-down conversion kits adapters. This ring light has an optimal working distance between 150mm and 450mm and will operate with either an NPN or a PNP signal. The 0-10 VDC intensity control assists in gaining full control of the light output.

    The RD130 operates with either an NPN or a PNP signal and runs on an industry standard 24 VDC.

    The ODRD130 features an Overdrive driver with NPN or PNP signal options.

    RD130 Product Details

    • Backlight diffuser
    • T-Slot for mounting
    • Conversion adapters for different cameras
    • PNP and NPN strobe input
    • Continuous operation or strobe mode
    • Dimmable via built In potentiometer
    • Analog intensity 0-10VDC signal
    • Eight, 1mm² die high current LEDs

    ODRD130 Product Details

    • 4-5 times brighter than standard high current LEDs
    • SafeStrobe Technology
    • Backlight diffuser
    • T-Slot for mounting
    • Conversion adapters for different cameras
    • PNP and NPN strobe input
    • Continuous operation or strobe mode
    • Dimmable via built In potentiometer
    • Analog intensity 0-10VDC signal
    • Eight, 1mm² die high current LEDs

    Lens options for the RD130 & RD130

    Wide angle comes standard. Narrow angle lenses are available.

    Wavelength options for the RD130 & ODRD130

    Wavelength options for RD130 and ODRD130

    RC130 & RCC130

    The all metal construction of the Ring Light Series of lights provides a small particle resistant and all around durable light. Its simple plug and play 5 Pin M12 connector allows for ease of use while allowing for full control. The RC130 and RCC130 operates with either an NPN or a PNP signal and runs on an industry standard 24 VDC. The 0-10 VDC intensity control assists in gaining full control of the light output. A standard 42 mm inner hole diameter allows for use with nearly all camera systems with available step-up and step-down conversion kits adapters.

    The RC130 was designed to produce a large uniform/homogenous light pattern. To achieve this, the RC130 contains special lenses for creating this near collimated light pattern. Optics include a focused uniform lens for wide vision.

    The RCC130 was designed to produce a narrow uniform/homogenous light pattern. To achieve this, the RC130 contains special lenses for creating this near collimated light pattern. Optics include a tightly focused uniform lens for narrow version.

    RC130 Product Details

    RCC130 - LED Ring Wide Light
    • Wide – focused uniform lens
    • PNP and NPN Strobe input
    • Continuous operation or strobe mode
    • Dimmable via built in potentiometer
    • Analog intensity 0-10VDC signal
    • Eight, 1mm² die high current LEDs

    RCC130 Product Details

    RCC130 - LED Ring Narrow Light
    • Narrow - tight focus uniform lensing
    • PNP and NPN Strobe input
    • Continuous operation or strobe mode
    • Dimmable via built in potentiometer
    • Analog intensity 0-10VDC signal
    • Eight, 1mm² die high current LEDs

    Wavelength options for the RC130 & RCC130

    Wavelength options for RC130 and RCC130

    Additional Product Images

    Ring lights for machine vision light 0 - additional images

    CAD Drawings for the Ring Lights series

    ProductFile Format
    R80 / ODR80 / RD80 / ODRD80
    (PDF)

    (DXF)

    (STEP)
    R130 / ODR130 / RD130 / ODRD130 / ODR130-16 / RC130 / RCC130
    (PDF)

    (DXF)

    (STEP)
    All STEP files saved in a zip folder for easy downloading

    Adapters for the Ring Lights series

    Adapters for Mounting Ring Light Directly to Lenses

    Step Up Adapter

    Standard Adapter Kit

    Standard Adapter Kit includes 2 step up rings (25.5 and 27), 6 set screws and hex tool. 6 set screws - 3 for mounting step up ring to light and 3 additional for lens. Some locking thumbscrews may prevent the lens from fitting through the center of the R80, extra low-profile replacement set screws are included, allowing the protruding thumbscrews to be removed.

    Step Up Adapter Kit includes step up rings, 6 set screws and hex tool. Lenses can be mounted to front or back of ring light.

    Step Up Adapter Kit

    M46 step-upLens thread sizePart #
    4625.5SU25.5-46
    4627SU27-46
    4630.5SU30.5-46
    4637SU37-46
    4639SU39-46
    4640.5SU40.5-46
    4643SU43-46
    4655DF55-46
    4634.9DF34.9-46
    Step Up Adapter Drawing

    Step Down Adapter Rings

    M46 step-downLens thread sizePart #
    4649SD49-46
    4652SD52-46
    4655SD55-46
    4658SD58-46
    4662SD62-46
    4667SD67-46
    4672SD72-46
    Step Down Adapter Drawing

    Adapters for Mounting Ring Light Directly to Camera

    Cognex CamerasDalsa CamerasDatalogic CamerasMatrox Cameras
    Cognex Insight 5000 CameraDalsa CameraDatalogic A30 CameraMatrox Iris Camera
    Cognex camera adapter mounts directly to Insight series 5000 camera
    Adapter Part# DF55-46
    Dalsa camera adapter mounts directly to BOA series camera
    Adapter Part# DF34.9-46
    Datalogic camera adapter mounts directly to A series cameras
    Adapter Part# DF55-46
    Matrox camera adapter mounts directly to Iris GT & Gator cameras
    Adapter Part# DF55-46

    Polarizes and Diffusers for the EZ Mount Ring Lights

    Diffuser Kits (D Kits)Diffuser - BacklightDiffuser - Clear LensPolarizer
    R80 and ODR80Diffuser - Backlight R80Diffuser - Backlight R80Diffuser - Clear Lens R80Polarize R80
    R130 and ODR130Diffuser - Backlight R130Diffuser - Backlight R130Diffuser - Clear Lens R130Polarize - R130

    Polarizes and Diffusers Data Sheets for the Ring Light Series

    EZ Mount Ring Lights Product Video