Accessories

Machine Vision Accessories

Accessories for your Machine Vision Lighting Products

Smart Color Box

Smart Color Box Test Light Multicolor tester

The Smart Color Box is an important tool for testing the different colors that work best on your vision application. Great for field testing on a vision application or use in a Vision Lab. Simple to use just push the button for the desired color. Smart Color Box works with standard CCD or CMOS cameras. Materials respond to color in different ways. Sometimes the only way to know the color or wavelength that works the best is by testing different color lights. Purchasing each color LED light can be very expensive. The "Smart Color Box" is 1/10th the cost vs. buying 6 different colors of LED lights.

Product Details

  • 6 High Current LED's - White, Red 625nm, Blue 470nm, Green 530nm, UV 395nm & IR 850nm
  • Li-ion battery with integrated charger / Up to 2 hours of operation before recharging
  • Recharges in 6 hours / Includes recharging power adapter
  • Push button testing for LED on/off
  • High Power, High Current LED's

S75-SCB-UV - UV color box

Product Details

  • UV LED’s – 365nm & 395nm
  • Li-ion battery with integrated charger / Up to 2 hours of operation before recharging
  • Recharges in 6 hours / Includes recharging power adapter
  • Push button testing for LED on/off

PGM Stroboscope Module

The PGM Stroboscope Module is a free running pulse generator that causes any attached light to strobe at the set pulse rate. This independent unit provides a strobe signal allowing any Smart Vision Lights product to strobe at a set frequency without the presence of an NPN or PNP trigger. This unit easily integrates between your power source and the LED array using a male to female M12 connection. It operates at a 10% duty cycle, meaning that the light will be active for 10% of the period and inactive for 90%. of the period. The pulse rate can be set to any frequency from 12 to 3200 Hz with 2 rotary dials. The first dial has 8 positions consisting of 12, 25, 50, 100, 200, 400, 800, and 1600 Hz. The second dial allows the user to finely adjust the frequency set by the first dial. This dial can be set up to 2 times the frequency of the first dial. The Stroboscope Module can be used on standard or OverDrive LED lights.
PGM Stroboscope Module

PTM Module

Smart Vision Lights products are pulse following and will track the camera’s lighting strobe signal. Some cameras are pulse initiated and are not pulse following. High speed cameras operate by initiating with a strobe pulse but then expect the light to hold output for a set time or duration. The Pulse Initiated Timing Module accepts a pulse of 5µs or longer and holds the pulse for the selected duration. The PTM allows the user to select a pulse length from 8 preset durations of 20, 50, 100, 250, 500, 750, or 1000 microseconds. The Module has a male M12 connector input which will connect to the camera and a female M12 output which will connect to Smart Vision Lights.
PTM Module
Travel Kit

Travel Kit

The SVL Travel Kit is a great tool to take along on sales demonstrations and for lab testing. SVL Travel Kits can be tailored for you by specifying what color lights to be included in your kit.

Product Details

The kit includes the following lights and accessories:
  • (1) S30 Prox Light
  • (1) S75 Brick Light
  • (1) R80 Ring Light
  • (1) L300 Linear Connect-A-Light
  • (1) S75-SCB Smart Color Box
  • (1) SU46-25.5/27 Ring Light Adapter Kit
  • (1) T-1 Power Supply
  • Carrying Case

T1 Power Supply

Product Details

  • 120VAC input to 24VDC output
  • 1.9 Amps
  • M12 Connection

T2 Power Supply

Product Details

  • 120VAC input to 24VDC output
  • 9 Amps
  • M12 Connection
IVP-C1

IVP-C1 Variable Control Pot

Product Details

  • Variable control remote Pot for controlling the intensity of a Smart Vision Light.
CTL-IO-4

CTL-IO-4 I/O MODULE

Product Details

The CTL-IO-4 I/O Module is used to provide inputs for triggering LED lights. The CTL-IO-4 Module is externally powered and is designed to be used with a strobe source or camera system and can actively send a strobe signal to run up to four separate outputs. Input signals can be NPN or PNP from the camera or strobe source. The I/O Module will also set all lights to full intensity or allow all lights to be adjusted with the Master Intensity Control potentiometer or each of the four outputs are able to be controlled by its own potentiometer.